Mit ace Kameras mehr sehen! Qualität sichern! Bildverarbeitung perfektionieren!

2

Max. Bildkreis 1/2″

1

C-mount Anschluss

ace 2 Basic USB3.0 Kamera
a2A2600-64umBAS

Monochrom-Kamera

Die Basler a2A2600-64umBAS USB3.0 Kamera mit dem Gpixel GMAX2505 CMOS-Sensor liefert 64 Bilder pro Sekunde bei 5,6 MP Auflösung.

1

Stromversorgung: Via USB 3.0 interface

2

Schnittstelle: USB 3.0

Technischen Daten!

a2A2600-64umBAS
Allgemeine Information
Artikelnummer108370
Produktlinieace 2 Basic
Sensor
SensorherstellerGpixel
SensorGMAX2505
Shutter-TechnologieGlobal Shutter
Sensorformat1/2“
Sensor Diagonale8.5 mm
SensortypenCMOS
Sensorgröße6,5 mm x 5,4 mm
Auflösung (HxV)2600 px x 2160 px
Auflösung5.6 MP
Pixelgröße (H x V)2,5 µm x 2,5 µm
Bildrate64 fps
Mono/FarbeMono
EMVA-Daten
Quanteneffizienz (typisch)0.646
Dark Noise (typisch)2,5 e¯
Saturation Capacity (typisch)9,8 ke¯
Dynamikbereich (typisch)70,0 dB
Signal-Rausch-Verhältnis (typisch)39,9 dB
Kameradaten
SchnittstelleUSB 3.0
Pixel Bit Depth8/10/12 bits
Synchronisierungfree-run
hardware trigger
software trigger
Belichtungssteuerungprogrammable via the camera API
hardware trigger
Digitaler Input1
General Purpose I/O2
StromversorgungVia USB 3.0 interface
Leistung (typisch)3,6 W
Bauform
Housing TypBox
Größe (L x B x H)42,8 mm x 29 mm x 29 mm
ObjektivanschlussC-mount
Betriebstemperatur-10°C – 60°C
Gewicht (typisch)85g
Konformität
KonformitätRoHS
CE
IP30
FCC
GenICam
USB3 Vision
EAC
KC
UL

a2A2600-64umBAS
ChunksAuto Brightness Status
CRC Checksum
Counter Value
Exposure Time
Frame ID
Gain
Line Status All
Timestamp
Timestamp Value
Color Creation and EnhancementBrightness and Contrast
Event ReportingExposure End
Frame Buffer Overrun
Frame Start
Frame Trigger Missed
Overrun
Temperature Status Changed
Test
I/O ControlInput Filter
Image Acquisition ControlAcquisition Frame Rate
Acquisition Mode
Acquisition Start, Stop, and Abort
Acquisition Status
Exposure Active Trigger
Exposure End Trigger
Exposure Start Delay
Exposure Start Trigger
Frame Active Trigger
Frame Burst Active Trigger
Frame Burst End Trigger
Frame Burst Start Trigger
Frame End Trigger
Frame Start Trigger
High Speed Burst Mode
Sensor Readout Time
Trigger Delay
Triggered by Hardware
Triggered by Software
Line Source SignalsCounter Active
Exposure Active
Frame Burst Active
Frame Burst Trigger Wait
Frame Trigger Wait
Serial Tx
Timer 1 Active, Timer 2 Active
User Output 1, 2, and 3
MiscellaneousDevice Information Parameters
Device Temperature
Sensor Bit Depth
Sensor State
Temperature State
Transfer Bit Depth
User Sets (Configuration Sets)
User-Defined Values
Pixel FormatsMono 10
Mono 10p
Mono 12
Mono 12p
Mono 8
Standard FeaturesAuto Function Profile
Binning
Black Level
Center X and Center Y
Counter
Digital Shift
Exposure Auto
Exposure Mode: Timed
Exposure Mode: Trigger Controlled
Exposure Mode: Trigger Width
Exposure Time
Gain
Gain Auto
Gamma Correction
Image ROI (Region of Interest)
Lookup Table (LUT)
Multiple ROI
Reverse X (Horizontal Mirroring)
Reverse Y (Vertical Mirroring)
Test Patterns
Timer

Angebot Kamera anfordern!

Seitenanfang